- Minimum Order Quantity :
- 1
- Unit of Measure :
- Set/Sets
Having several years of experience in current domain, our quality centric firm is involved in offering HD-T100 Truck Mounted Drilling Rig. Mounted on a tractor, the offered rig is mainly used to create holes in the ground and to drill oil or water wells. Under experts guidance, this rig is manufactured using world class components with the use of latest techniques. Also, this HD-T100 Truck Mounted Drilling Rig is made accessible to clients in different specifications
HD-T100 Drilling rig is installed on a four-wheel-drive tractor. The PTO shaft of the chassis powers the hydraulic system. To its maximum reach, it can drill to any stratum anywhere. Similar 5o truck-mounted drills, it has speed in movement and cross-country ability similar to the caterpillar track-mounted drills. Perfect mobility, efficiency, cross-country ability and usefulness in many applications is guaranteed.
Convenient to control and flexible to operate, this drilling rig can move conveniently and meet different different requirements, including seismic exploration.
The front of the engine drives air compressor with mechanical transmission output, resulting in reduction in energy conversion, enhanced efficiency. There is an electromagnetic clutch is used for control power transmission.
The Drilling Rig comprises an air compressor or mud pump. It can drill loose gravel, mud flat, steppe and even some difficult to drill areas, like rock zone or land in front of the hill.
Main Features:
- The main hydraulic system adopts the load sensitive system and is equipped with the controlled cooling system.
- Hydraulic auxiliary system full load keep the original car configuration system.
- Full hydraulic driving system for hoisting / pulling down and rotation.
- The rig has two rear stabiliser jacks.
- Power head with a 3m free stroke and 2.8m pipe.
- The new power head design of the circulating drilling fluid and the bearing chamber is introduced for the purpose of reducing the chances of bearing damage.
Specifications:
| Drilling method | Depth | Pipeï¼diameterÃlengthï¼ | Hole diameter | ||
| Mud drilling | 100 m | Ï50Ã2800 | 75/90mm | ||
| Air drilling/Hammer drilling | 40 m | Ï50Ã2800 | 75/82mm | ||
| Screw drilling | 30 m | Ï50ÃÏ90Ã2800 | 90mm | ||
| Sonic vibrate drilling | 30 m | Ï50Ã2800 | 75mm | ||
| Multifunctional power swivel | Rating torque | 1310 N.m | |||
| Rated speed | 0ï½390 r/min | ||||
| Max. vibrate frequency | 180 Hz | ||||
| Max vibrate force | 194 kN | ||||
| Hydraulic system | Working pressure | 180bar | |||
| Hoisting/Push-down system / Hydraulic cylinder control double speed slid frame | Max. hoisting weight | 2800 kg | |||
| Max. Push-down Force | 14 kN | ||||
| Max. hoisting speed | 0.85 m/s | ||||
| Machine stabilization | Two rear jacks | ||||
| Pipe clamp | Two direction hydraulic clamp / Single cylinder clamp (options) | ||||
| Unscrew tool | Swivel hydraulic control slide fork / Well-top hydraulic clamp(options) | ||||
| Engine power | 51.4kW/2400r/min | ||||
| Air screw compressor /Standard | Displacement | 5.6 M3/min | |||
| Pressure | 7 bar | ||||
| Piston mud pump /Options | Displacement | 200 L/min | |||
| Pressure | 40 bar | ||||
| Overall weight | â¤5000 kg | ||||
Having several years of experience in current domain, our quality centric firm is involved in offering HD-T100 Truck Mounted Drilling Rig. Mounted on a tractor, the offered rig is mainly used to create holes in the ground and to drill oil or water wells. Under experts guidance, this rig is manufactured using world class components with the use of latest techniques. Also, this HD-T100 Truck Mounted Drilling Rig is made accessible to clients in different specifications
HD-T100 Drilling rig is installed on a four-wheel-drive tractor. The PTO shaft of the chassis powers the hydraulic system. To its maximum reach, it can drill to any stratum anywhere. Similar 5o truck-mounted drills, it has speed in movement and cross-country ability similar to the caterpillar track-mounted drills. Perfect mobility, efficiency, cross-country ability and usefulness in many applications is guaranteed.
Convenient to control and flexible to operate, this drilling rig can move conveniently and meet different different requirements, including seismic exploration.
The front of the engine drives air compressor with mechanical transmission output, resulting in reduction in energy conversion, enhanced efficiency. There is an electromagnetic clutch is used for control power transmission.
The Drilling Rig comprises an air compressor or mud pump. It can drill loose gravel, mud flat, steppe and even some difficult to drill areas, like rock zone or land in front of the hill.
Main Features:
- The main hydraulic system adopts the load sensitive system and is equipped with the controlled cooling system.
- Hydraulic auxiliary system full load keep the original car configuration system.
- Full hydraulic driving system for hoisting / pulling down and rotation.
- The rig has two rear stabiliser jacks.
- Power head with a 3m free stroke and 2.8m pipe.
- The new power head design of the circulating drilling fluid and the bearing chamber is introduced for the purpose of reducing the chances of bearing damage.
Specifications:
| Drilling method | Depth | Pipeï¼diameterÃlengthï¼ | Hole diameter | ||
| Mud drilling | 100 m | Ï50Ã2800 | 75/90mm | ||
| Air drilling/Hammer drilling | 40 m | Ï50Ã2800 | 75/82mm | ||
| Screw drilling | 30 m | Ï50ÃÏ90Ã2800 | 90mm | ||
| Sonic vibrate drilling | 30 m | Ï50Ã2800 | 75mm | ||
| Multifunctional power swivel | Rating torque | 1310 N.m | |||
| Rated speed | 0ï½390 r/min | ||||
| Max. vibrate frequency | 180 Hz | ||||
| Max vibrate force | 194 kN | ||||
| Hydraulic system | Working pressure | 180bar | |||
| Hoisting/Push-down system / Hydraulic cylinder control double speed slid frame | Max. hoisting weight | 2800 kg | |||
| Max. Push-down Force | 14 kN | ||||
| Max. hoisting speed | 0.85 m/s | ||||
| Machine stabilization | Two rear jacks | ||||
| Pipe clamp | Two direction hydraulic clamp / Single cylinder clamp (options) | ||||
| Unscrew tool | Swivel hydraulic control slide fork / Well-top hydraulic clamp(options) | ||||
| Engine power | 51.4kW/2400r/min | ||||
| Air screw compressor /Standard | Displacement | 5.6 M3/min | |||
| Pressure | 7 bar | ||||
| Piston mud pump /Options | Displacement | 200 L/min | |||
| Pressure | 40 bar | ||||
| Overall weight | â¤5000 kg | ||||
22 Kang Zhuang Road, The Economic Development Zone Of Zhuozhou, Hebei Province, Zhuozhou, Hebei, 072750, China
Phone :86-312-3628776